Repair and Calibration Services
Instructions for Sending in Repairs to Tohnichi America
Send only Tohnichi items. We do not service other brands. Include the following information on your paperwork:
- Name of Contact Person
- Your fax number for quotation
- Detailed description of the problem with the tool
- If you will require NIST traceable certificate
You may either send items through your local dealer or send them directly to Tohnichi's repair department.
If you are not a dealer and send directly to Tohnichi's repair department, Terms of Payment are COD or Credit Card payment only.
A bench fee (min. $20.00 ) may apply depending on the type of tool and condition of the tool upon receipt. This fee will be waived if new tool is purchased.
A quotation will be faxed upon inspection of the tool, no work will be performed without customer's written approval.
Service Fees (2009)
Preset Fees
| Torque Wrenches: QSP, CSP, SP, RSP, BQSP, BCSP |
Below 280N.m or Equivalent Model |
$15.00 per tool |
| 280N.m Equivalent or Larger Model |
$20.00 per tool |
| Torque Drivers: NTD and RNTD |
$10.00 per tool |
NIST Certificate
(Note: If tool is found to be out of calibration, additional adjustment fees of $60.00 per hour charged in 15 min increments will apply. Does not apply for new tools.)
| Torque Wrench |
Preset Torque Wrench |
$20.00 per tool |
| Mechanical "Click" Torque Wrenches ; Below 280N.m or Equivalent Model |
$40.00 per tool |
| Mechanical "Click" Torque Wrenches ; 280N.m - 700N.m Equivalent Model |
$60.00 per tool |
| Mechanical "Click" Torque Wrenches ; 700N.m Equivalent or Larger Model |
$120.00 per tool |
| Dial & Flat Beam Torqeu Wrenches ; Below 280N.m or Equivalent Model |
$60.00 per tool |
| Dial & Flat Beam Torqeu Wrenches ; 280N.m - 700N.m Equivalent Model |
$80.00 per tool |
| Digital Torque Wrenches ; CEM and CTB |
$80.00 per tool |
| Angle Torque Wrenches ; CTA |
$120.00 per tool |
| Torque Driver |
Preset Torque Drivers ; NTD, RNTD |
$10.00 per tool |
| Adjustable Torque Drivers ; RTD, LTD |
$30.00 per tool |
| Dial Indicating Torque Drivers ; FTD, FTD-S |
$60.00 per tool |
| Torque Drivers ; AMLD, AMRD, BMLD, BMRD, MTD |
$90.00 per tool |
| Digital Torque Drivers ; STC |
$60.00 per tool |
| Torque Gauge |
ATG |
$100.00 |
| BTG |
$140.00 |
| Torque Tester |
Any TOHNICHI Torque tester and gauge |
TBD |
Example of Service Fees
| Preset Type |
QSP100N4, Torque Set 50N.m |
$15.00 |
| QSP100N4, Torque Set 50N.m & NIST Cert. |
$35.00 |
| CSP280N3X22D, Torque Set 150N.m |
$20.00 |
| CSP280N3X22D, Torque Set 150N.m & NIST Cert. |
$40.00 |
| RNTD120CN, Torque Set 100cN.m |
$10.00 |
| RNTD120CN, Torque Set 100cN.m & NIST Cert. |
$20.00 |
| Adjustable Type |
QL25N, NIST Cert. |
$40.00 |
| QL420N, NIST Cert. |
$60.00 |
| QLE750N, NIST Cert. |
$120.00 |
Labor Rates
Bench Fee
Base inspection fee, usually waived if repair quote approved or new replacement tool purchased at time tool is at the repair dept. |
$20.00 |
| Hourly Labor Rate |
$60.00 |
|
|
|
|
|
|
Contact Information |
|
|
Send All Tohnichi Products for Repair and Calibration To:
Tohnichi Repair Department
677 Academy Drive
Northbrook, IL 60062
1-847-272-8480
Contact: Andrew (ext. 27)
Email: repairs@tohnichi.com
|
|
|
|
|
|
