DOTE2

DOTE2 Version has been replaced with New DOTE3 Series

Digital torque wrench tester.

Operating Instructions

Select proper model according to unit of measure as following color code :

S.I. =

Metric =

American =

Accuracy ±1% + 1digit

Model			Torque Range						Inlet Drive		Torque Wrench Max. Effective Length		Weight Approx.		Accessory
S.I.	Metric	American	Min.-Max.			Graduation			Inlet Drive		Torque Wrench Max. Effective Length		Weight Approx.		Socket (Female)		Hex Adapter (Male)
S.I.	Metric	American	S.I.	Metric	American	S.I.	Metric	American	mm	in.	mm	in.	kg	lbs.	mm	in.	mm
DOTE20N	200DOTE2	200DOTE 2-A	N.m 2-20	kgf.cm 20-200	in.lbs 17-170	N.m 0.005	kgf.cm 0.05	in.lbs 1	9.53	3/8	400	15 3/4	11	24 1/4	6.35	1/4	10, 13, 19 12, 14, 17
DOTE36N	360DOTE2	360DOTE 2-A	3.6-36	36-360	30-300	0.01	0.1	2	9.53	3/8					6.35	1/4
DOTE100N	1000DOTE2	1000DOTE 2-A	10-100	100-1000	87-870	0.02	0.2	5	12.7	1/2					6.35, 9.53	3/8
DOTE200N	2000DOTE2	2000DOTE 2-A	20-200	200-2000	170-1700	0.05	0.5	5	12.7	1/2	660	26	13	28 11/16	-	-	17, 22, 27 19, 24, 30
DOTE360N	3600DOTE2	3600DOTE 2-A	36-360	kgf.m 3.6-36	ft.lbs 25-250	0.1	kgf.m 0.01	ft.lbs 2	19.05	3/4	660	26	13	28 11/16	12.7	1/2	17, 22, 27 19, 24, 30
DOTE700N	7000DOTE2	7000DOTE 2-A	70-700	7-70	50-500	0.2	0.02	2	19.05		1260	49 19/32	25	55 1/8	-	-	22, 27, 29, 30, 32, 36
DOTE1000N	10000DOTE2	10000DOTE 2-A	100-1000	100-1000	70-700	0.2	0.02	2	25.4		1650	49 19/32	45	99 7/32	19.05	3/4	22, 27, 29, 30, 32, 36

1. 2m x 2P flat type plug is supplied as standard.
2. BCD output is available as option.

Common Specification

DATA MEMORY	99 data
ARITHMETIC FUNCTION	Sampling, Maximum, Minimum, Mean
MEASUREMENT MODE	PEAK / RUN
ZERO ADJUSTMENT	Manual
DATA OUTPUT	RS232C (Printer: standard, personal computer: change by inside dip switch)
RESET	Manual /Auto (0.5 ~ 5.0 sec freely changeable by 0.1 sec.)
OPERATING CONDITION [°C]	Temperature 0 ~ 40
POWER SOURCE AC[V]	100 ~ 240 50/60Hz Auto shift.