Repair and Calibration Fees
Service and Calibration Fees
Preset Fees
| Price as of February 3, 2025 | |||
| Torque Wrenches: QSP, CSP, SP, RSP, BQSP, BCSP | Preset Service | $30 per tool | |
| Preset Service with Calibration Certificate | $50 per tool | ||
| Torque Drivers: NTD and RNTD | Preset Service | $20 per tool | |
| Preset Service with Calibration Certificate | $40 per tool |
Calibration with Certificates
| Feb 3, 2025 | |||
| Torque Wrench | Mechanical “Click” Torque Wrenches; Below 280N.m or Equivalent Model | $50.00 per tool | |
| Mechanical “Click” Torque Wrenches; 280N.m – 700N.m Equivalent Model | $70.00 per tool | ||
| Mechanical “Click” Torque Wrenches; 700N.m Equivalent or Larger Model | $130.00 per tool | ||
| Dial & Flat Beam Torque Wrenches ; Below 280N.m or Equivalent Model | $70.00 per tool | ||
| Dial & Flat Beam Torque Wrenches; 280N.m – 700N.m Equivalent Model | $90.00 per tool | ||
| Digital Torque Wrenches; CEM , CTA, CPT, CTB Below 360NM and Equivalent Models | $130.00 per tool | ||
| Digital Torque Wrenches; CEM , CTA, CPT, CTB 360NM and Equivalent or Larger Models | $170.00 per tool | ||
| Torque Driver | Adjustable Torque Drivers; RTD, LTD, BMRD, BMLD | $50.00 per tool | |
| Dial Indicating Torque Drivers; FTD, FTD-S | $90.00 per tool | ||
| Torque Driver; AMLD, AMRD | $200.00 per tool | ||
| Digital Torque Drivers; STC | $130.00 per tool | ||
| Torque Gauge | ATG | $200.00 per tool | |
| BTG | $200.00 per tool | ||
| ATGE | $330.00 per tool | ||
| BTGE | $330.00 per tool | ||
| Torque Testers and Sensors | DOTE, DOT, TCC, TF, LC, TDT, ST, TME, TM, BTM, TT | Price on Request | POR |
NOTE: If tool is found to be out of calibration, additional adjustment fees of $60.00 per hour charged in 15 min increments will apply. Does not apply for new tools.
Products and Models outside our scope of ISO/IEC 17025: 2017 accreditation can be provided with Certificates of Calibration are traceable to S.I. through NIST for items calibrated at Tohnichi America’s facility. Some items may be sent to our factory for calibration and those items will have Certificates Traceable to JCSS Japan Calibration Service System with mutual recognition of ILAC International Laboratory Accreditation Cooperation and APLAC Asia Pacific Laboratory Accreditation by IA Japan.
Labor Rates
| Price as of February 3,2025 | ||
| Bench Fee Per tool (Required Prior to Quote) | $30.00 | |
| Bench Fee Mechanical Testers, Digital Testers/Meters | $50.00 | |
| Bench Fee DOTE500+, TCC(2), TF | $100.00 | |
| Hourly Labor Rate | $120.00 | |
| Special Handling Return Pallet Fee | $100.00 |
Note: Rush Service Available Upon Request for Additional Fees
Tohnichi America is an ISO/IEC 17025:2017 accredited facility
Please fill out the service form, print, and include with your shipment to our repair department.